{"title":"Motorcycle Chassis Components and Racing Accessories","description":"\u003cdiv class=\"collection-seo-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eMotorcycle chassis components\u003c\/strong\u003e are essential for improving control, ergonomics, riding precision and motorcycle feedback. In this section, you will find racing accessories and technical components dedicated to the riding position, handlebars, rearsets, levers, triple clamps, clip-ons and parts connected to the motorcycle’s dynamic behaviour.\u003c\/p\u003e\n\u003cp\u003eA properly configured chassis allows the motorcycle to be ridden with greater safety, precision and stability, especially on sport motorcycles, naked motorcycles and motorcycles used for sport riding or on the track.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eMotorcycle chassis components for control and precision\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMotorcycle Chassis Components\u003c\/strong\u003e include all the parts that influence the rider’s position, dynamic behaviour, corner entry, stability and control during changes of direction. Rearsets, clip-ons, triple clamps, levers, handlebars and ergonomic accessories can make a noticeable difference to riding feedback.\u003c\/p\u003e\n\u003cp\u003eChoosing components suited to the motorcycle makes possible to improve posture, support, responsiveness and control precision, both on the road and during sport riding.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eAvailable motorcycle chassis accessories\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/motorcycle-rearsets\"\u003e\u003cstrong\u003emotorcycle rearsets\u003c\/strong\u003e\u003c\/a\u003e for a sport-oriented riding position, grip and control\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/motorcycle-handlebars-clip-ons\"\u003e\u003cstrong\u003eMotorcycle handlebars and clip-ons\u003c\/strong\u003e\u003c\/a\u003e for ergonomics, posture and front-end feedback\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/motorcycle-triple-clamps\"\u003e\u003cstrong\u003eMotorcycle triple clamps\u003c\/strong\u003e\u003c\/a\u003e for chassis precision, rigidity and control\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/motorcycle-clutch-levers\"\u003e\u003cstrong\u003emotorcycle clutch levers\u003c\/strong\u003e\u003c\/a\u003e for modulation, comfort and command control\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/motorcycle-brake-levers\"\u003e\u003cstrong\u003emotorcycle brake levers\u003c\/strong\u003e\u003c\/a\u003e for braking feedback, precision and safety\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/motorcycle-steering-dampers\"\u003e\u003cstrong\u003eMotorcycle steering dampers\u003c\/strong\u003e\u003c\/a\u003e for front-end stability and control\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/motorcycle-accessories\"\u003e\u003cstrong\u003eMotorcycle Accessories\u003c\/strong\u003e\u003c\/a\u003e for upgrades, customisation and technical components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eRacing motorcycle chassis components for track use\u003c\/h2\u003e\n\u003cp\u003eDuring sport riding and track use, the chassis becomes even more important because every control must be precise, stable and consistent with the rider’s riding style. Rearsets, clip-ons, triple clamps and steering dampers help make the motorcycle more effective under braking, during corner entry and under acceleration.\u003c\/p\u003e\n\u003cp\u003eRacing motorcycle chassis accessories are designed to improve ergonomics, rigidity, adjustment and control, providing a configuration that is more suitable for sport riding than the original components.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eBenefits of motorcycle chassis accessories\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eImproved riding position\u003c\/li\u003e\n\u003cli\u003eGreater control during changes of direction\u003c\/li\u003e\n\u003cli\u003eGreater precision under braking and during corner entry\u003c\/li\u003e\n\u003cli\u003eMore direct feedback from the controls\u003c\/li\u003e\n\u003cli\u003eAdjustability according to the rider’s riding style\u003c\/li\u003e\n\u003cli\u003eMore technical and racing-oriented styling\u003c\/li\u003e\n\u003cli\u003eComponents suitable for road, sport and track use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eMotorcycle chassis component compatibility\u003c\/h2\u003e\n\u003cp\u003eMany motorcycle chassis components are specific to the motorcycle brand, model and model year. Before purchasing, it is important to check compatibility, product code, mounting point, available adjustments and possible interference with other accessories already installed.\u003c\/p\u003e\n\u003cp\u003eAlways check compatibility with fairings, exhaust systems, rearsets, sensors, brake master cylinders, controls, wiring and aftermarket components already installed on the motorcycle.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eUseful links\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/motorcycle-accessories\"\u003e\u003cstrong\u003eMotorcycle Accessories\u003c\/strong\u003e\u003c\/a\u003e for technical components and racing upgrades\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/motorcycle-suspensions-and-racing-shock-absorbers\"\u003e\u003cstrong\u003emotorcycle suspension\u003c\/strong\u003e\u003c\/a\u003e for stability, setup and dynamic behaviour\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/motorcycle-brakes-and-racing-braking-system\"\u003e\u003cstrong\u003emotorcycle braking system\u003c\/strong\u003e\u003c\/a\u003e for braking power, control and safety\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/motorcycle-engine-fairing-protection\"\u003e\u003cstrong\u003eMotorcycle protection\u003c\/strong\u003e\u003c\/a\u003e for engine covers, frame and exposed components\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/cnc-racing\"\u003e\u003cstrong\u003eCNC Racing accessories\u003c\/strong\u003e\u003c\/a\u003e for aluminium components, protection parts and racing details\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/complete-motorcycle-exhausts-and-racing-components\"\u003e\u003cstrong\u003emotorcycle exhausts\u003c\/strong\u003e\u003c\/a\u003e for sound, reduced weight and performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFrequently asked questions about motorcycle chassis components\u003c\/h2\u003e\n\u003ch3\u003eWhat do motorcycle chassis components include?\u003c\/h3\u003e\n\u003cp\u003eMotorcycle chassis components include parts that influence riding, control, the rider’s position and dynamic behaviour, such as rearsets, handlebars, clip-ons, triple clamps, levers, suspension components and steering dampers.\u003c\/p\u003e\n\u003ch3\u003eWhich accessories improve motorcycle control?\u003c\/h3\u003e\n\u003cp\u003eRearsets, clip-ons, triple clamps, adjustable levers, suspension components and steering dampers can improve control, precision and riding feedback.\u003c\/p\u003e\n\u003ch3\u003eAre motorcycle chassis components universal?\u003c\/h3\u003e\n\u003cp\u003eSome accessories may be universal, but many components are specific to the motorcycle brand, model and model year. Always check compatibility and the mounting point before purchasing.\u003c\/p\u003e\n\u003ch3\u003eAre chassis components important for track use?\u003c\/h3\u003e\n\u003cp\u003eYes, chassis components are essential on the track because affect stability, precision, riding position and motorcycle control during the most demanding riding phases.\u003c\/p\u003e\n\u003ch3\u003eHow do I choose the correct motorcycle chassis component?\u003c\/h3\u003e\n\u003cp\u003eCheck the motorcycle brand, model and model year, product code, available adjustments, intended use and compatibility with any original or aftermarket components already installed.\u003c\/p\u003e\n\u003c\/div\u003e","products":[{"product_id":"contrappesi-manubrio-italia-cnc-racing-ducati-hypermotard-950","title":"CONTRAPPESI MANUBRIO ITALIA CNC RACING DUCATI HYPERMOTARD 950","description":"\u003cp\u003e\u003cstrong\u003eSMTOKEN0 Racing Duchy handlebars Hypermotard 950\u003c\/strong\u003e is a handlebar counterweight SMTOKEN0 Racing for \u003cstrong\u003e\u003c\/strong\u003e. The product clearly identifies component, application and finish, so the card remains specific for this bike and not generic.\u003c\/p\u003e\u003cp\u003eHandlebar counterweights made by full light alloy through machines SMTOKEN0 and subsequent surface anodization. The kit is provided with the screw needed for mounting on the most common types of handlebars. On the motorcycle provided with standard paramani will be necessary to provide for their removal. The kit consists of 2 pieces.\u003c\/p\u003e\u003cp\u003eThe intervention area is \u003cstrong\u003ehandlebar terminal\u003c\/strong\u003e: the component is useful for finishing the handlebar terminals and must be chosen according to the real configuration of the bike.\u003c\/p\u003e\u003ch3\u003eMain information\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnical category: \u003cstrong\u003ebike handlebars\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndicative compatibility: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCode: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy choose it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003efinishing of handlebar terminals\u003c\/li\u003e\n\u003cli\u003einstallation with dedicated screw\u003c\/li\u003e\n\u003cli\u003elook racing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFinal control:\u003c\/strong\u003e verify that SMTOKEN0 950 matches your bike and always compares product code SMTOKEN2 , year and version before purchase.\u003c\/p\u003e","brand":"Cnc Racing","offers":[{"title":"Default Title","offer_id":52156874228048,"sku":"CM241R","price":50.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/6915\/1824\/files\/CM241R_9a225191-c8e2-4412-9219-89c50bc35b16.jpg?v=1759824928"},{"product_id":"dadi-ruota-posteriore-in-titanio-cnc-racing-ducati-hypermotard-1100-evo-2010-12","title":"NUTS RUOTA POSTERIORE IN TITANIO CNC RACING DUCATI HYPERMOTARD 1100 EVO 2010-12","description":"\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e is a wheel pin and nuts SMTOKEN0 Racing titanium for \u003cstrong\u003e\u003c\/strong\u003e. The product clearly identifies component, application and finish, so the card remains specific for this bike and not generic.\u003c\/p\u003e\u003cp\u003eSingle-arm wheel nuts made from full Titanium SMTOKEN0 5.\u003c\/p\u003e\u003cp\u003eThe intervention area is \u003cstrong\u003ewheel component\u003c\/strong\u003e: the component is useful for fixing dedicated wheel and should be chosen according to the real configuration of the motorcycle, to the titanium material.\u003c\/p\u003e\u003ch3\u003eMain information\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnical category: \u003cstrong\u003ewheel pins and motorcycle nuts\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndicative compatibility: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial\/finishing detected: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCode: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy choose it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ededicated wheel fixing\u003c\/li\u003e\n\u003cli\u003e\u003c\/li\u003e\n\u003cli\u003ecompatibility with model and year indicated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFinal control:\u003c\/strong\u003e verify that SMTOKEN0 SMTOKEN3 correspond to your bike and always compare product code SMTOKEN4 , year and version before purchase.\u003c\/p\u003e","brand":"Cnc Racing","offers":[{"title":"Default Title","offer_id":52158732861776,"sku":"DA382X","price":221.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/6915\/1824\/files\/DA382X_14dc6e0c-d436-4007-ad87-6617e11f3e1e.jpg?v=1759848127"},{"product_id":"dadi-corona-posteriore-m10x1-25-nero-cnc-racing-aprilia-rsv4-racing-factory","title":"NUTS REAR SPROCKET POSTERIORE M10X1.25 CNC RACING APRILIA RSV4 RACING FACTORY","description":"\u003cp\u003e\u003cstrong\u003eSMTOKEN0 Racing Wheel and Dadi Aprilia Rsv4 Racing Factory\u003c\/strong\u003e is a wheel pin and nuts SMTOKEN0 Racing for \u003cstrong\u003e\u003c\/strong\u003e. The product clearly identifies component, application and finish, so the card remains specific for this bike and not generic.\u003c\/p\u003e\u003cp\u003eCrown dice made by the full alloy light through machines SMTOKEN0 , and subsequent surface anodization. No modifications are required for mounting, simply replace the original Kit dice consisting of five dice.\u003c\/p\u003e\u003cp\u003eThe intervention area is \u003cstrong\u003ewheel component\u003c\/strong\u003e: the component is useful for fixing dedicated wheel and should be chosen according to the real configuration of the bike.\u003c\/p\u003e\u003ch3\u003eMain information\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnical category: \u003cstrong\u003ewheel pins and motorcycle nuts\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndicative compatibility: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCode: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy choose it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ededicated wheel fixing\u003c\/li\u003e\n\u003cli\u003e\u003c\/li\u003e\n\u003cli\u003ecompatibility with model and year indicated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFinal control:\u003c\/strong\u003e verify that SMTOKEN0 RSV4 SMTOKEN1 SMTOKEN2 correspond to your bike and always compare product code SMTOKEN3 , year and version before purchase.\u003c\/p\u003e","brand":"Cnc Racing","offers":[{"title":"NERO","offer_id":52823571857744,"sku":"DA383B","price":29.75,"currency_code":"EUR","in_stock":true},{"title":"ORO","offer_id":52823571890512,"sku":"DA383G","price":29.75,"currency_code":"EUR","in_stock":true},{"title":"ROSSO","offer_id":52823571923280,"sku":"DA383R","price":29.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/6915\/1824\/files\/DA383B_DA383G_DA383R_180_25035b05-d48b-43a8-878d-a5c3bfb0c3a7.jpg?v=1759848162"},{"product_id":"distanziale-conico-per-dado-ruota-nero-cnc-racing-ducati-1098-s","title":"DISTANZIALE CONICO DADO RUOTA CNC RACING DUCATI 1098 S","description":"\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e is a wheel pin and nuts SMTOKEN0 Racing for \u003cstrong\u003e\u003c\/strong\u003e. The product clearly identifies component, application and finish, so the card remains specific for this bike and not generic.\u003c\/p\u003e\u003cp\u003eConical spacer for rear wheel nut Ducati worked by full light alloy with subsequent surface anodization. Plug\u0026amp;Play: replaces the original part without any modification.\u003c\/p\u003e\u003cp\u003eThe intervention area is \u003cstrong\u003ewheel component\u003c\/strong\u003e: the component is useful for fixing dedicated wheel and should be chosen according to the real configuration of the bike.\u003c\/p\u003e\u003ch3\u003eMain information\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnical category: \u003cstrong\u003ewheel pins and motorcycle nuts\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndicative compatibility: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCode: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy choose it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ededicated wheel fixing\u003c\/li\u003e\n\u003cli\u003e\u003c\/li\u003e\n\u003cli\u003ecompatibility with model and year indicated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFinal control:\u003c\/strong\u003e verify that SMTOKEN0 1098 S matches your bike and always compares product code SMTOKEN1 , year and version before purchase.\u003c\/p\u003e","brand":"Cnc Racing","offers":[{"title":"NERO","offer_id":52823426269520,"sku":"DAA01B","price":27.63,"currency_code":"EUR","in_stock":true},{"title":"ORO","offer_id":52823426302288,"sku":"DAA01G","price":27.63,"currency_code":"EUR","in_stock":true},{"title":"ROSSO","offer_id":52823426335056,"sku":"DAA01R","price":27.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/6915\/1824\/files\/DAA01B_DAA01G_DAA01R_215924d0-468f-47ea-906b-5a987602e5a4.jpg?v=1759850196"},{"product_id":"kit-distanziali-mozzo-ruota-anteriore-nero-cnc-racing-ducati-1198-s","title":"KIT DISTANZIALI MOZZO RUOTA ANTERIORE CNC RACING DUCATI 1198 S","description":"\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e is a wheel pin and nuts SMTOKEN0 Racing for \u003cstrong\u003e\u003c\/strong\u003e. The product clearly identifies component, application and finish, so the card remains specific for this bike and not generic.\u003c\/p\u003e\u003cp\u003eDuchy front wheel hub spacer kit worked by full light alloy with subsequent surface anodization.\u003c\/p\u003e\u003cp\u003eThe intervention area is \u003cstrong\u003ewheel component\u003c\/strong\u003e: the component is useful for fixing dedicated wheel and should be chosen according to the real configuration of the bike.\u003c\/p\u003e\u003ch3\u003eMain information\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnical category: \u003cstrong\u003ewheel pins and motorcycle nuts\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndicative compatibility: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCode: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy choose it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ededicated wheel fixing\u003c\/li\u003e\n\u003cli\u003e\u003c\/li\u003e\n\u003cli\u003ecompatibility with model and year indicated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFinal control:\u003c\/strong\u003e verify that SMTOKEN0 1198 S matches your bike and always compares product code SMTOKEN1 , year and version before purchase.\u003c\/p\u003e","brand":"Cnc Racing","offers":[{"title":"NERO","offer_id":52823411458384,"sku":"DAA51B","price":34.85,"currency_code":"EUR","in_stock":true},{"title":"ORO","offer_id":52823411491152,"sku":"DAA51G","price":34.85,"currency_code":"EUR","in_stock":true},{"title":"ROSSO","offer_id":52823411523920,"sku":"DAA51R","price":34.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/6915\/1824\/files\/DAA51B_DAA51G_DAA51R_c9443e07-2acc-4a8f-b440-ed4e6f41d7f5.jpg?v=1759850373"},{"product_id":"fermaglio-dado-ruota-posteriore-nero-cnc-racing-ducati-996","title":"FERMAGLIO DADO RUOTA POSTERIORE CNC RACING DUCATI 996","description":"\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e is a wheel pin and nuts SMTOKEN0 Racing for \u003cstrong\u003e\u003c\/strong\u003e. The product clearly identifies component, application and finish, so the card remains specific for this bike and not generic.\u003c\/p\u003e\u003cp\u003eSafety lock for Ducati rear wheel nut made of painted harmonic steel. Plug\u0026amp;Play: replaces the original part without any modification. Diameter\u003c\/p\u003e\u003cp\u003eThe intervention area is \u003cstrong\u003ewheel component\u003c\/strong\u003e: the component is useful for fixing dedicated wheel and should be chosen according to the real configuration of the bike.\u003c\/p\u003e\u003ch3\u003eMain information\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnical category: \u003cstrong\u003ewheel pins and motorcycle nuts\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndicative compatibility: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCode: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy choose it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ededicated wheel fixing\u003c\/li\u003e\n\u003cli\u003e\u003c\/li\u003e\n\u003cli\u003ecompatibility with model and year indicated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFinal control:\u003c\/strong\u003e verify that SMTOKEN0 996 matches your bike and always compares product code SMTOKEN1 , year and version before purchase.\u003c\/p\u003e","brand":"Cnc Racing","offers":[{"title":"NERO","offer_id":52823396712784,"sku":"DAM03B","price":10.63,"currency_code":"EUR","in_stock":true},{"title":"ORO","offer_id":52823396745552,"sku":"DAM03G","price":10.63,"currency_code":"EUR","in_stock":true},{"title":"BLU","offer_id":52823396778320,"sku":"DAM03L","price":10.63,"currency_code":"EUR","in_stock":true},{"title":"ROSSO","offer_id":52823396811088,"sku":"DAM03R","price":10.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/6915\/1824\/files\/DAM03B_DAM03G_DAM03L_DAM03R_33_b45fde8f-8659-4b86-a2f1-7755cb357625.jpg?v=1759850530"},{"product_id":"dado-cannotto-di-sterzo-nero-cnc-racing-aprilia-rsv4-racing-factory-2015-18","title":"DADO CANNOTTO STERZO CNC RACING APRILIA RSV4 RACING FACTORY 2015-18","description":"\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e is a steering plate\/canot SMTOKEN0 Racing for \u003cstrong\u003e\u003c\/strong\u003e. The product clearly identifies component, application and finish, so the card remains specific for this bike and not generic.\u003c\/p\u003e\u003cp\u003eDado canto worked from full through cnc machines with subsequent surface anodization. Mounting is simple, replaces the original nut and does not need any modification. The kit consists of 1 piece\u003c\/p\u003e\u003cp\u003eThe intervention area is \u003cstrong\u003eavantrene bike\u003c\/strong\u003e: the component is useful for precision of the avantrene and must be chosen according to the real configuration of the bike.\u003c\/p\u003e\u003ch3\u003eMain information\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnical category: \u003cstrong\u003emotorcycle steering plates\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndicative compatibility: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCode: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy choose it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eprecision of the front\u003c\/li\u003e\n\u003cli\u003eprocessing from full\u003c\/li\u003e\n\u003cli\u003euse with dedicated configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFinal control:\u003c\/strong\u003e verify that SMTOKEN0 RSV4 SMTOKEN1 SMTOKEN2\u003c\/p\u003e","brand":"Cnc Racing","offers":[{"title":"NERO","offer_id":52820283720016,"sku":"GH100B","price":43.78,"currency_code":"EUR","in_stock":true},{"title":"ROSSO","offer_id":52820283752784,"sku":"GH100R","price":43.78,"currency_code":"EUR","in_stock":true},{"title":"ARGENTO","offer_id":52820283785552,"sku":"GH100S","price":43.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/6915\/1824\/files\/GH100B_GH100R_GH100S_7077587a-3dc4-4d92-bead-43c101d3ff82.jpg?v=1759852303"},{"product_id":"pedane-regolabili-carbon-pramac-nero-cnc-racing-ducati-streetfighter-v4-sp2","title":"REARSETS REGOLABILI CARBONIO PRAMAC CNC RACING DUCATI STREETFIGHTER V4 SP2","description":"\u003cp\u003e\u003cstrong\u003eSMTOKEN0 Racing Pedane Moto Carbonio Ducati Streetfighter V4 Sp2\u003c\/strong\u003e is a adjustable motorcycle pedane SMTOKEN0 Carbon racing for \u003cstrong\u003e\u003c\/strong\u003e. The product clearly identifies component, application and finish, so the card remains specific for this bike and not generic.\u003c\/p\u003e\u003cp\u003eQuality raw materials, robustness and assembly components for extreme use characterize the new platforms for Ducati Streetfighter SMTOKEN0 S. 1) increased sections for maximum stress points. 2) 12 adjustment positions 3) configuration for road change and reverse change without any change. . 4) enjoyed “racing” footrest for maximum grip even in the most critical wet conditions. 5) workshop motorcycle stand hole. 6) all-built carbon fiber pads, designed to ensure optimal support and protection. 7) footrests and levers are reclining and lockable by means of stretch steel plugs, included in the kit. 8) Rear gear levers are mounted on bearings for optimum smoothness. 9) hydrostop included\u003c\/p\u003e\u003cp\u003eThe intervention area is \u003cstrong\u003edriving position\u003c\/strong\u003e: the component is useful for support of the driver and must be chosen according to the real configuration of the bike, to the carbon material.\u003c\/p\u003e\u003ch3\u003eMain information\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnical category: \u003cstrong\u003epedane bike\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndicative compatibility: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial\/finishing detected: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCode: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy choose it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003esupport from the pilot\u003c\/li\u003e\n\u003cli\u003eadjustment of the driving position\u003c\/li\u003e\n\u003cli\u003econtrol in sports driving\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFinal control:\u003c\/strong\u003e verify that SMTOKEN0 Streetfighter V4 SP2 matches your bike and always compares product code SMTOKEN1 , year and version before purchase.\u003c\/p\u003e","brand":"Cnc Racing","offers":[{"title":"Nero","offer_id":52820706787664,"sku":"PE410BPR","price":852.55,"currency_code":"EUR","in_stock":true},{"title":"Argento\/Rosso","offer_id":52820706820432,"sku":"PE410RPR","price":852.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/6915\/1824\/files\/PE410PR_dfc4d94a-d075-4809-b55b-71a4f1b8338f.jpg?v=1759932796"},{"product_id":"pedane-regolabili-cnc-racing-ducati-supersport-950-s","title":"REARSETS REGOLABILI CNC RACING DUCATI SUPERSPORT 950 S","description":"\u003cp\u003e\u003cstrong\u003eSMTOKEN0 Racing Pedane Moto Ducati Supersport 950 S\u003c\/strong\u003e is a adjustable motorcycle platform SMTOKEN0 Racing for \u003cstrong\u003e\u003c\/strong\u003e. The product clearly identifies component, application and finish, so the card remains specific for this bike and not generic.\u003c\/p\u003e\u003cp\u003eMade entirely of Aluminium, worked from full by using numerical control machines and subsequent surface anodization treatment. SMTOKEN0 2 footrest positionings - Leve brake and gearbox on double ball bearing - Adjustments “brake lever and gearbox” on slide guide (range of SMTOKEN0 . Compared to stock configuration - - -20 + SMTOKEN1 ) - Stop light sensor fitting - Oil tank support and rear brake pump - Aisi 304 steel screw\u003c\/p\u003e\u003cp\u003eThe intervention area is \u003cstrong\u003edriving position\u003c\/strong\u003e: the component is useful for support of the driver and must be chosen according to the real configuration of the bike.\u003c\/p\u003e\u003ch3\u003eMain information\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnical category: \u003cstrong\u003epedane bike\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndicative compatibility: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCode: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy choose it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003esupport from the pilot\u003c\/li\u003e\n\u003cli\u003eadjustment of the driving position\u003c\/li\u003e\n\u003cli\u003econtrol in sports driving\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFinal control:\u003c\/strong\u003e verify that SMTOKEN0 Supersport 950 S matches your bike and always compares product code SMTOKEN1 , year and version before purchase.\u003c\/p\u003e","brand":"Cnc Racing","offers":[{"title":"Nero","offer_id":52820704133456,"sku":"PE444B","price":927.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/6915\/1824\/files\/PE444B_483288a2-ec4e-40f6-9932-3a74baada4de.jpg?v=1759932825"},{"product_id":"piastra-di-sterzo-superiore-oro-carbon-cnc-racing-ducati-panigale-v4-r","title":"TRIPLE CLAMP SUPERIORE CARBONIO CNC RACING DUCATI PANIGALE V4 R","description":"\u003cp\u003e\u003cstrong\u003eSMTOKEN0 Racing Plate Carbon Ducati Panigale V4 R\u003c\/strong\u003e is a steering plate\/canot SMTOKEN0 Racing in carbon for \u003cstrong\u003e\u003c\/strong\u003e. The product clearly identifies component, application and finish, so the card remains specific for this bike and not generic.\u003c\/p\u003e\u003cp\u003eUpper steering plate for Ducati Panigale V4 made from solid light alloy with subsequent surface anodization and carbon fiber insert. The plate is supplied with lightened stainless steel screws. As an option, the titanium screw kit Ø SMTOKEN0\u003c\/p\u003e\u003cp\u003eThe intervention area is \u003cstrong\u003eavantrene bike\u003c\/strong\u003e: the component is useful for the accuracy of the avantrene and must be chosen according to the real configuration of the bike, carbon material.\u003c\/p\u003e\u003ch3\u003eMain information\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnical category: \u003cstrong\u003emotorcycle steering plates\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndicative compatibility: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial\/finishing detected: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCode: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy choose it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eprecision of the front\u003c\/li\u003e\n\u003cli\u003eprocessing from full\u003c\/li\u003e\n\u003cli\u003euse with dedicated configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFinal control:\u003c\/strong\u003e verify that SMTOKEN0 Panigale V4 R matches your bike and always compares product code SMTOKEN1 , year and version before purchase.\u003c\/p\u003e","brand":"Cnc Racing","offers":[{"title":"Oro","offer_id":52820619886928,"sku":"PST17G","price":341.7,"currency_code":"EUR","in_stock":true},{"title":"Rosso","offer_id":52820619919696,"sku":"PST17R","price":341.7,"currency_code":"EUR","in_stock":true},{"title":"Argento","offer_id":52820619952464,"sku":"PST17S","price":341.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/6915\/1824\/files\/PST17G_PST17R_PST17S.jpg?v=1759934029"},{"product_id":"registri-precarico-forcella-22-mm-nero-cnc-racing","title":"REGISTRI PRECARICO FORCELLA 22 MM CNC RACING","description":"\u003cp\u003e\u003cstrong\u003eSMTOKEN0 Racing Register Motorcycle Suspension Indicated\u003c\/strong\u003e is a suspended register SMTOKEN0 Racing for \u003cstrong\u003emotorcycle indicated\u003c\/strong\u003e. The product clearly identifies component, application and finish, so the card remains specific for this bike and not generic.\u003c\/p\u003e\u003cp\u003eFork baskets made by full alloy light and anodized. They allow the preload spring inside the forks. Kit composed of 2 pieces.\u003c\/p\u003e\u003cp\u003eThe intervention area is \u003cstrong\u003eadjusting trim\u003c\/strong\u003e: the component is useful for adjustment of the suspension and should be chosen according to the real configuration of the motorcycle.\u003c\/p\u003e\u003ch3\u003eMain information\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnical category: \u003cstrong\u003emotorcycle suspension logs\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndicative compatibility: \u003cstrong\u003emotorcycle indicated\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCode: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy choose it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003esuspension regulation\u003c\/li\u003e\n\u003cli\u003eprecision of assembly\u003c\/li\u003e\n\u003cli\u003etechnical control finishing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFinal control:\u003c\/strong\u003e verify that indicated bike corresponds to your bike and always compares product code SMTOKEN0 , year and version before purchase.\u003c\/p\u003e","brand":"Cnc Racing","offers":[{"title":"Nero","offer_id":52820594950480,"sku":"RE370B","price":34.43,"currency_code":"EUR","in_stock":true},{"title":"Oro","offer_id":52820594983248,"sku":"RE370G","price":34.43,"currency_code":"EUR","in_stock":true},{"title":"Blu","offer_id":52820595016016,"sku":"RE370L","price":34.43,"currency_code":"EUR","in_stock":true},{"title":"Rosso","offer_id":52820595048784,"sku":"RE370R","price":34.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/6915\/1824\/files\/RE370B_RE370G_RE370R.jpg?v=1759934440"},{"product_id":"riser-manubrio-cnc-racing-ducati-monster-s4r-s","title":"RISER MANUBRIO CNC RACING DUCATI MONSTER S4R S","description":"\u003cp\u003e\u003cstrong\u003eSMTOKEN0 Racing Riser Ducati Monster S 4 Rs\u003c\/strong\u003e is a handlebar riser SMTOKEN0 Racing for \u003cstrong\u003e\u003c\/strong\u003e. The product clearly identifies component, application and finish, so the card remains specific for this bike and not generic.\u003c\/p\u003e\u003cp\u003eRiser Ø28, SMTOKEN0 Please note that the following models must be matched exclusively to our SMTOKEN1 : Ducati Monster 695 Ducati Monster 800 Ducati Monster 1000\u003c\/p\u003e\u003cp\u003eThe intervention area is \u003cstrong\u003ehandlebar position\u003c\/strong\u003e: the component is useful for the height\/position of the handlebar and must be chosen according to the real configuration of the bike.\u003c\/p\u003e\u003ch3\u003eMain information\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnical category: \u003cstrong\u003eriser bike\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndicative compatibility: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCode: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy choose it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eheight\/position of the handlebar\u003c\/li\u003e\n\u003cli\u003ededicated fixing\u003c\/li\u003e\n\u003cli\u003eergonomic guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFinal control:\u003c\/strong\u003e verify that SMTOKEN0 Monster S 4 SMTOKEN1 correspond to your bike and always compare product code SMTOKEN2 , year and version before purchase.\u003c\/p\u003e","brand":"Cnc Racing","offers":[{"title":"Nero","offer_id":52820592329040,"sku":"RM210B","price":78.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/6915\/1824\/files\/RM210B_10ea54cf-06d6-4c65-b2af-698ef1a933c0.jpg?v=1759934471"},{"product_id":"rivestimento-sella-pilota-cnc-racing-ducati-panigale-v4-s-2018-24","title":"RIVESTIMENTO SELLA PILOTA CNC RACING DUCATI PANIGALE V4 S 2018-24","description":"\u003cp\u003e\u003cstrong\u003eSMTOKEN0 Racing Motorcycle Accessories Ducati Panigale V4 S SMTOKEN1\u003c\/strong\u003e is a motorcycle accessory SMTOKEN0 Racing SMTOKEN1 Racing for \u003cstrong\u003e\u003c\/strong\u003e. The product clearly identifies component, application and finish, so the card remains specific for this bike and not generic.\u003c\/p\u003e\u003cp\u003eSaddle upholstery made of Ecopelle Ultra-grip non-slip black, side inserts in Ecopelle CarbonLook black and red; double-point reinforced contrasting seams. - Waterproof and resistant to sunlight. - High resistance to chemical agents\u003c\/p\u003e\u003cp\u003eThe intervention area is \u003cstrong\u003emotorcycle component\u003c\/strong\u003e: the component is useful for compatibility with the indicated bike and must be chosen according to the real configuration of the bike.\u003c\/p\u003e\u003ch3\u003eMain information\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnical category: \u003cstrong\u003ebike cover\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndicative compatibility: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCode: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy choose it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ecompatibility with the indicated motorcycle\u003c\/li\u003e\n\u003cli\u003etechnical finishing SMTOKEN0\u003c\/li\u003e\n\u003cli\u003ededicated assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFinal control:\u003c\/strong\u003e verify that SMTOKEN0 Panigale V4 S SMTOKEN1 correspond to your bike and always compare product code SMTOKEN2 , year and version before purchase.\u003c\/p\u003e","brand":"Cnc Racing","offers":[{"title":"Default Title","offer_id":52174431519056,"sku":"SLD01BR","price":205.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/6915\/1824\/files\/SLD01BR_da4303c3-54f6-4aa2-a54a-f6fd5941c817.jpg?v=1760112628"},{"product_id":"rivestimento-sella-cnc-racing-mv-agusta-dragster-800-rr-2018-20","title":"RIVESTIMENTO SELLA CNC RACING MV AGUSTA DRAGSTER 800 RR 2018-20","description":"\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e is a motorcycle accessory SMTOKEN0 Racing SMTOKEN1 Racing for \u003cstrong\u003e\u003c\/strong\u003e. The product clearly identifies component, application and finish, so the card remains specific for this bike and not generic.\u003c\/p\u003e\u003cp\u003eSeat cover made of Ecopelle CorduraLook non-slip black and side inserts in Ecopelle CarbonLook black and red with double-point reinforced contrasting seams. - Waterproof and resistant to sunlight. High resistance to chemicals.\u003c\/p\u003e\u003cp\u003eThe intervention area is \u003cstrong\u003emotorcycle component\u003c\/strong\u003e: the component is useful for compatibility with the indicated bike and must be chosen according to the real configuration of the bike.\u003c\/p\u003e\u003ch3\u003eMain information\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnical category: \u003cstrong\u003ebike cover\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndicative compatibility: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCode: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy choose it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ecompatibility with the indicated motorcycle\u003c\/li\u003e\n\u003cli\u003etechnical finishing SMTOKEN0\u003c\/li\u003e\n\u003cli\u003ededicated assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFinal control:\u003c\/strong\u003e verify that SMTOKEN0 SMTOKEN1 Dragster 800 SMTOKEN2 SMTOKEN3\u003c\/p\u003e","brand":"Cnc Racing","offers":[{"title":"Default Title","offer_id":52174434369872,"sku":"SLM06BR","price":208.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/6915\/1824\/files\/SLM06B.jpg?v=1760112840"},{"product_id":"alzamanubrio-h-20mm-per-riser-oem-nero-cnc-racing-ducati-multistrada-v4-s","title":"ALZAMANUBRIO H 20MM RISER OEM CNC RACING DUCATI MULTISTRADA V4 S","description":"\u003cp\u003e\u003cstrong\u003eSMTOKEN0 Racing Riser Duchy Multistrada V4 S\u003c\/strong\u003e is a handlebar riser SMTOKEN0 Racing for \u003cstrong\u003e\u003c\/strong\u003e. The product clearly identifies component, application and finish, so the card remains specific for this bike and not generic.\u003c\/p\u003e\u003cp\u003eLift with height SMTOKEN0 . Built in light alloy through full workings with subsequent surface anodization treatment. The kit consists of two spacers having the same diameter and shape of the original riser column and two special stainless steel screws. The installation is very simple and requires no change. not compatible with our complete riser SMTOKEN0 , but only with the original one.\u003c\/p\u003e\u003cp\u003eThe intervention area is \u003cstrong\u003ehandlebar position\u003c\/strong\u003e: the component is useful for the height\/position of the handlebar and must be chosen according to the real configuration of the bike.\u003c\/p\u003e\u003ch3\u003eMain information\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnical category: \u003cstrong\u003eriser bike\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndicative compatibility: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCode: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy choose it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eheight\/position of the handlebar\u003c\/li\u003e\n\u003cli\u003ededicated fixing\u003c\/li\u003e\n\u003cli\u003eergonomic guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFinal control:\u003c\/strong\u003e verify that SMTOKEN0 Multistrada V4 S matches your bike and always compares product code SMTOKEN1 , year and version before purchase.\u003c\/p\u003e","brand":"Cnc Racing","offers":[{"title":"Nero","offer_id":52820549468496,"sku":"RM260B","price":47.6,"currency_code":"EUR","in_stock":true},{"title":"Rosso","offer_id":52820549501264,"sku":"RM260R","price":47.6,"currency_code":"EUR","in_stock":true},{"title":"Argento","offer_id":52820549534032,"sku":"RM260S","price":47.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/6915\/1824\/files\/RM260B_RM260R_RM260S_08c477a3-221c-4de0-9775-e999e6f66205.jpg?v=1760111827"},{"product_id":"dadi-ruota-posteriore-supporto-cavalletto-nero-cnc-racing-ducati-monster-696","title":"NUTS RUOTA POSTERIORE + SUPPORTO CAVALLETTO CNC RACING DUCATI MONSTER 696","description":"\u003cp\u003e\u003cstrong\u003eSMTOKEN0 Racing Wheel pins and Ducati dice Monster 696\u003c\/strong\u003e is a wheel pin and nuts SMTOKEN0 Racing for \u003cstrong\u003e\u003c\/strong\u003e. The product clearly identifies component, application and finish, so the card remains specific for this bike and not generic.\u003c\/p\u003e\u003cp\u003eRear wheel nuts made by full light alloy with subsequent surface anodization. The dice are designed to accommodate the stand. Kit composed of 2 dice.\u003c\/p\u003e\u003cp\u003eThe intervention area is \u003cstrong\u003ewheel component\u003c\/strong\u003e: the component is useful for fixing dedicated wheel and should be chosen according to the real configuration of the bike.\u003c\/p\u003e\u003ch3\u003eMain information\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnical category: \u003cstrong\u003ewheel pins and motorcycle nuts\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndicative compatibility: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCode: \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy choose it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ededicated wheel fixing\u003c\/li\u003e\n\u003cli\u003e\u003c\/li\u003e\n\u003cli\u003ecompatibility with model and year indicated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFinal control:\u003c\/strong\u003e verify that SMTOKEN0 Monster 696 matches your bike and always compares product code SMTOKEN1 , year and version before purchase.\u003c\/p\u003e","brand":"Cnc Racing","offers":[{"title":"Nero","offer_id":52820537606480,"sku":"SC200B","price":86.28,"currency_code":"EUR","in_stock":true},{"title":"Oro","offer_id":52820537639248,"sku":"SC200G","price":86.28,"currency_code":"EUR","in_stock":true},{"title":"Rosso","offer_id":52820537672016,"sku":"SC200R","price":86.28,"currency_code":"EUR","in_stock":true},{"title":"Argento","offer_id":52820537704784,"sku":"SC200S","price":86.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/6915\/1824\/files\/SC200B_SC200G_SC200R_SC200S_9ed39067-0af7-4bff-8137-736b6b3edd04.jpg?v=1760111933"},{"product_id":"boccole-di-sterzo-jetprime-per-kawasaki-1-5-ninja-zx-10r-2016-18","title":"JETPRIME STEERING BUSHES 1,5° KAWASAKI NINJA ZX-10R 2016-18","description":"\u003cdiv class=\"sestamarcia-product-description\"\u003e\n\u003cp\u003e\u003cstrong\u003eSteering bushings SMTOKEN0 for Kawasaki 1.5â° Ninja SMTOKEN1 -10r SMTOKEN2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is a SMTOKEN0 for motorcycle developed for technical, sports and racing applications, with specific compatibility for the model indicated. The card is organized to clearly show product, application and compatibility, avoiding generic or little useful descriptions for the customer.\u003c\/p\u003e\n\u003cp\u003eThis accessory is related to SMTOKEN0 , model 1.5° Ninja SMTOKEN1 , years SMTOKEN2 . Before purchase it is recommended to always compare model, year and product code with the configuration of your bike.\u003c\/p\u003e\n\u003ch2\u003eMain features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTechnical accessory SMTOKEN0 for motorcycle.\u003c\/li\u003e\n\u003cli\u003eSpecific compatibility for model and year indicated.\u003c\/li\u003e\n\u003cli\u003eSuitable for sports and racing configurations.\u003c\/li\u003e\n\u003cli\u003eAlways check the application data before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility and product data\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct code\u003c\/th\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Category\u003c\/th\u003e\n\u003ctd\u003eaccessories SMTOKEN0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand Name\u003c\/th\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel motorcycle\u003c\/th\u003e\n\u003ctd\u003e1.5 Ninja\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYear of compatibility\u003c\/th\u003e\n\u003ctd\u003e2016-18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhy choose SMTOKEN0\u003c\/h2\u003e\n\u003cp\u003eSMTOKEN0 is a brand specialized in electronic components, controls and technical accessories for sports motorcycles, naked, scooters and racing configurations. Each product must be chosen according to the real compatibility with the motorcycle and the configuration of use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant note:\u003c\/strong\u003e always check product code, motorcycle model and year of compatibility before order. In case of doubts about compatibility it is preferable to carry out preventive verification.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"JETPRIME","offers":[{"title":"Default Title","offer_id":52420109828432,"sku":"JP BSK 015","price":72.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/6915\/1824\/files\/boccole-di-sterzo-kawasaki-15_e6cd586a-7b37-488b-83c1-6dbc502c82cb.jpg?v=1764931090"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/6915\/1824\/collections\/ChatGPT_Image_8_mag_2026_18_03_33.png?v=1778256243","url":"https:\/\/www.sestamarcia.com\/en\/collections\/motorcycle-chassis-components-racing-accessories.oembed","provider":"Sestamarcia Racing Part Italia S.r.l.","version":"1.0","type":"link"}