GIACCA DA MOTO IMPERMEABILE CLOVER SAVANA 4 WP N/GR

Waterproof Fabric Jacket.
SMTOKEN0 SMTOKEN1 is the new Adventure Touring solution that, with all the latest technologies such as the in&out membrane, the SMTOKEN2 dual membrane system and the possibility to open up 6 ventilations, will have no problem facing any route.

The Clover Savana-4 jacket is a robust product, but at the same time comfortable thanks to the new reinforced Ripstop materials that are also elasticized, guaranteeing protection and comfort.

This technology exploits the construction with large ventilation panels of 3 layers and laminated outer fabrics, which guarantee a barrier that blocks up to 80% of the rain.

The remaining 20% that can penetrate from hinges or seams will be blocked by the internal membrane SMTOKEN0 which will ensure the waterproofness of the head .

In this way we obtain a solution that keeps most of the surface of the internal membrane (Intermediate Road) not covered with water even under the worst weather conditions, always allowing a high breathability and avoiding the concentration of condensation and sweating within the head.

Moreover, by dividing the water column between the two layers the one with external laminated material and that of the inner membrane, we manage to obtain a water column of SMTOKEN0 + SMTOKEN1 , without having to use extremely rigid materials that would then prejudge the mobility of the jacket or use in the warmer periods.

A further plus is that the external materials of Clover Savana-4 laminated dry quickly as they do not absorb water, quickly reporting the jacket in its dry condition and not weighing it even during the most intense rains.

To ensure ventilation even in the hottest days, without sacrificing the protection of a product studied and realized by the collaboration between Clover and companies of the territory SMTOKEN0 , in order to ensure maximum control and the highest standards.

A bit like for the older sister, the SMTOKEN1 SMTOKEN0 ’ idea is to create a jacket under the jacket, made of air to face the warmest climates. The air flows into several points inside the head where it is distributed by the 3D ventilation panels that develop under the entire surface of the head with the task of bringing fresh air inside the whole jacket and not only where exposed directly to the wind.

Functionality

Waterproof and ventilated jacket SMTOKEN0 /touring
SMTOKEN0 2020
Certification Category SMTOKEN0 : Level “ SMTOKEN1 ”
Waterproof membrane SMTOKEN0
Waterproof membrane with “In&Out” function
Removable thermal padding
External fabrics: SMTOKEN0 and SMTOKEN1 RipStop
External fabrics Laminati
SMTOKEN0 Dual Membrane system (external + internal)
Protections “ SMTOKEN0 ” Type-B on Level 2 shoulders and elbows
Approve “ SMTOKEN0
Protection SMTOKEN0
Back Pro-Vent or Back Pro-6 protection set for Level 2
Preparation for chest protection “ SMTOKEN0 ” “ SMTOKEN1 ” level 1
Front, side and rear laminates
Certification SMTOKEN0 17092:2020 category " SMTOKEN2 "
Arm volume adjustment via adjustable flap
Adjustment volume for forearm
Adjusting volume life by adjusting ring
Adjustment volume bottom jacket via double adjusting ring
Adjusting pulse volume via double flap Velcro
Nr.2 ventilation panels on front
Front vents convertible to pockets
Network-3D on the entire frontal surface of the jacket
Nr.2 SMTOKEN0
Nr.2 SMTOKEN0
Nr.2 waterproof front pockets
Nr.2 hand warmer pockets
Nr.2 inner pockets
Nr.2 inner pockets for chest protection
Nr.1 back pocket
Nr.2 front connection rings for gloves connection
SMTOKEN0
Comfort

SMTOKEN2 Dual membrane system ( SMTOKEN0
In the standard configuration the impremeable and breathable layer is inside the jacket to protect the user and allow him to remove it to increase air circulation with warm climates, but when the weather conditions stiffen you can wear it above the outer jacket, leaving it completely dry using the advantages of a laminated jacket.
This solution also offers the advantage of increasing transpiration and thermal insulation by creating a greater air gap that warms up with body heat.
3 jackets in 1: the jacket is composed of 3 independent layers that can be used to separate, so in addition to the jacket we have a membrane that can become a comfortable rainy stroller jacket, the thermal part a comfortable jacket with 120 grams of insulation for fresh and dry exits, or joining these two you get a warm and waterproof stroller.
A considerable saving in terms of baggage.
3D Network: Ventilations everywhere graces the 3D network even where air does not affect directly.
In addition to the large number of ventilation sockets, including a hidden under the central hinge, the entire outer jacket from the front pockets to the back pocket is constituted under the external fabric by a layer of 3D network, which conveys the air through its channels throughout the body indifferently if this is affected or not by direct ventilation.
Materials

SMTOKEN0 woven fabric water repellent 500 denari + laminated with membrane SMTOKEN1 + elasticized + reinforced with ripstop texture. Used on waist, shoulders and elbows to ensure fit of head to biker movements
SMTOKEN0 Fabric 700 Denari + laminate membrane SMTOKEN1 + Cotton Feeling, treatment to make the fabric similar to natural fibers to touch
Membrane SMTOKEN1 waterproof SMTOKEN0 , breathable 10000gm224h
Security

Clover Savana-4 is certified SMTOKEN0 level “ SMTOKEN1 ”
Protections: level 2 made in Italy, fully ventilated, on shoulders and elbows
Back Pro-Vent or Back Pro-6 protection set for Level 2
SMTOKEN0